0,34 KG

Our price:
 Request price

Model Marvin Test Solutions: MV-GC2230
2.0 GHz Measurement Time Interval Counter PCI Card

  • 14 measurement functions
  • DC to 2.0 GHz
  • 100 ps resolution without averaging
  • Fast measurement mode: 2300 readings / second
  • External reference clock & arming inputs
  • Gate signal output
  • Self-calibration feature ensures highest accuracy
  • Software selectable input impedence (1 MOhm or 50 Ohm) and coupling (AC or DC) for each input channel

The Marvin Test MV-GC2230 PCI universal time interval counter offers many of the measurement and timing functions of high-end stand-alone frequency counters, including accumulate, auto ratio, frequency, fast frequency, period, ratio, single period, test clock, time interval, time interval delay, totalize, totalize gated, totalize gated once, & pulse width. The MV-GC2230 covers frequencies up to 2.0 GHz. The card is also available in PXI format (GTX2230).


The MV-GC2230 counter has two signal input channels via BNC connectors, an external timebase input, arm input, and a gate signal output. The separate input signals can be used for arming and gating the circuitry, and controlling the timing of the analysis (start / stop duration) for maximum measurement flexibilty.

The MV-GC2230 counter uses an on-board microprocessor with embedded firmware to off-load processing tasks from the main CPU. The counters use high-density, low-power field programmable gate arrays (FPGA) to perform complex logic tasks. Reciprocal counting techniques are used to achieve high resolution measurements on lower frequency signals without sacrificing measurement time. These techniques provide a fixed number of digits of resolution for all frequencies rather than a fixed resolution in Hz for the same gate time.

The Marvin Test MV-GC2230 can measure frequencies to 0.1 parts per million (seven digits) in just 1 ms and resolve each time measurement to 100 ps. This ability to precisely resolve frequency and time allows for increased accuracy as well as reduced measurement time. When combined with 2,300 measurements / second, one of the fastest rates available, more data can be acquired in a single second than a typical GPIB counter can acquire in one minute.

Additionally, the counter includes an on-board 10 MHz TCXO timebase for internal frequency reference. An external 10 MHz input is also availble for use with external timebases.

Scope of Delivery:

  • Marvin Test Solutions MV-GC2230: Time Interval Counter PCI Card
  • Manual
  • Certificate of Calibration

Marvin Test Solutions

: *
: *
: *
Type the characters you see in the picture:

The code is case-sensitive and must be entered exactly as above.
Marvin Test MV-GC2230 Time Interval Counter
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.