MV-GX5283

MV-GX5283
SKU
MV-GX5283
Weight
0,20 KG



Our price:
 Request price

Model Marvin Test Solutions: MV-GX5283
Dynamic Digital I/O PXI Card (3U), 32 Channels up to 200 MHz w/512MB On-Board Memory, w/LVDS

  • 32 input or output channels
  • Industry-leading 512 MB on-board memory standard
  • Supports 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V TTL / LVTTL / CMOS / LVCMOS interfaces
  • Supports LVDS, M-LVDS, LVDM interfaces
  • Test rates up to 200 MHz
  • Operates as a stand-alone card or with up to seven additional synchronous slave boards
  • 3U PXI Instrument

The Marvin Test MV-GX5283 is a high performance, cost-effective 3U PXI dynamic digital I/O board with 32 TTL input or output channels and 32 LVDS input or output channels. The GX5283 offers an industry leading 512 MB of on-board memory and supports test rates up to 200 MHz. The single board design supports both master and slave functionality without the use of add-on modules.

Features

The MV-GX5283 supports selectable I/O levels of 1.5 V, 1.8 V, 2.5 V, 3.3 V, or 5 V (TTL, LVTTL, CMOS, LVCMOS). In addition, the MV-GX5283 also supports 32 differential channels for LVDS, M-LVDS, or LVDM logic families.

The TTL / LVTTL interface utilizes a programmable voltage source which sets the output logic levels from 1.4 V to 3.6 V. Programmable thresholds of 1.5 V, 1.8 V, 2.5 V or 3.3 V (5 V compatible) are supported for input signals. Recommended operating input voltage range is from 0 V to 5.5 V. The MV-GX5283 can operate as stand-alone card or with up to seven additional slave boards, providing a total of 256 synchronous channels.

A windowing method is utilized for PCI memory accesses to limit the required PCI memory space for each board to only 16 MB, thus preserving test system resources. A direct mode, for continuous data transfer between the test system controller and the I/O pins of the MV-GX5283 board is also supported.

Data direction is bi-directional, with direction configured on a per byte basis. Individual channel output enable control is also supported.

The Marvin Test MV-GX5283 Dynamic Digital I/O PXI Card provides 512 MB of total memory with 128 Mb - 4 Gb per channel.

Programmable I/O width allows trading vector width for vector depth. The GX5283 supports 128 Mb per channel when in 32 channel configuration, and is programmable down to a width of 1 channel with a depth of 4 GB. Widths of 32, 16, 8, 4, 2 and 1 channel(s) are supported.

The MV-GX5283 board provides programmable TTL / LVTTL output clocks and strobes, and support external clock and strobe. Programmable PLL’s (phase locked loop) provide configurable clock frequencies and delays. The Marvin Test MV-GX5283 additionally provides a LVDS output clock.

The MV-GX5283 Dynamic Digital I/O PXI Card can halt or pause on a defined address or loop through the entire memory. The MV-GX5283 can also loop on a defined address or through a defined block of memory.

Scope of Delivery:

  • Marvin Test Solutions MV-GX5283: Dynamic Digital I/O PXI Card (3U), 32 Channels up to 200 MHz w/512MB On-Board Memory, w/LVDS
  • Manual

Marvin Test Solutions


: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
Marvin Test MV-GX5283 Dynamic Digital I/O PXI Card (3U), 32 Channels up to 200 MHz w/512MB On-Board Memory, w/LVDS
MN-M9811
€ 511,00
 
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.