SK-HI-FS-1000 Fusion Splicer

SK-HI-FS-1000 Fusion Splicer
SKU
SK-HI-FS-1000
Weight
2,80 KG

Our price:
 Request price

Series SALUKI SK-HI-FS-1000
Fusion Splicer

  • Proven Reliability
  • Minimal Splice Loss
  • Easy Splice Operation
  • Great Splice Efficiency

The Saluki SK-HI-FS-1000 is the new standard core alignment fusion splicer. Known for its ruggedness and reliability, it is the world's best-selling single fiber fusion splicer.

Applicable Fibers Single / SMF (G.652 and G.657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Bare fiber, Pigtails, Patch cords
Cladding Diameter 80 μm to 150 μm
Coating Diameter 100 μm to 1,000 μm
Cleave length 8mm to 16mm
Splice mode Total 40 splice modes
Heating time from 10s to 90s
Typical splice loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF), 0.04dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Return loss >>60dB
Typical splice time 7sec SM AUTO mode
Typical tube heating time 25sec
Splice result storage Last 5,000 splices
Viewing methods /
magnification		 2 axis CMOS camera with 5.7" color LCD.
304X, 152X
Splice loss estimate Based upon dual camera core axis alignment data.
Tension test 2N
Applicable protection sleeve 60mm, 40mm, micro
No. of splice /
heating per battery full charge		 Typical 220 cycles
Typical electrode life 5000 splices
Lighting High brightness white LED
Power supply AC 100-240V, 50/60Hz
DC 13.5V/4.5A
Li-ion 11.1V, 10400mAh
Dimensions 160L x 150W x 140H (mm)
weight 2.3kg with AC adapter; 2.8kg with battery
Operating condition Altitude : 0 to 5,000m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Terminals USB, VGA
Software updates USB

SALUKI

 

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
Saluki SK-HI-FS-1000 Fusion Splicer
Saluki SK-HI-FS-1000 Fusion Splicer
Saluki SK-HI-FS-1000 Fusion Splicer
Saluki SK-HI-FS-1000 Fusion Splicer
GW-GDS-210
GW-GDS-210
€ 899,00

Categories

Special

Help

Cart is empty

New Products

News

What’s New in Electronics Live Exhibition 25-26 September

We shall be exhibiting at the WNIE Show at the NEC, Birmingham, England, on stand C54. We will have a large range of new and exciting test & measurement products on show so we hope to see you there.

Visit us on VNIE on Stand C54



All news   
 
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.