GW Instek: GW-PEL-2040A: Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~80V, 0~7

GW Instek: GW-PEL-2040A: Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~80V, 0~7
1.125,00 € *
Inhalt: 1 Stück

zzgl. MwSt. zzgl. Versandkosten

Der Artikel ist verfügbar.

  • GW-PEL-2040A
Downloads
Model GW Instek: GW-PEL-2040A Electronic Load Module - DC - Programmable - Single Channel -... mehr
Produktinformationen "GW Instek: GW-PEL-2040A: Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~80V, 0~7"

Model GW Instek: GW-PEL-2040A
Electronic Load Module - DC - Programmable - Single Channel - (0~80V, 0~70A, 350W)


• Sequence function to do high Efficient load simulations
• Flexible configuration with mainframes and plug-in modules
• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• Multiple channels run for dynamic tests under one clock control
• Maximum rated power for low range high resolution CC tests
• Von setting and Von on/off for start-up Von tests
• Program mode to create work routines for repetitive tests
• OPP/OCP/OVP/OTP protections
• External channel control/monitoring via an analog control connector
• Multi-Interface USB Device / Host, RS-232C, and GPIB (Optional)
• Multi-mainframe link up to 5 mainframes in a System

The PEL-2004 and PEL-2002 are multiple channel, programmable DC electronic loads with a modularized structure. The PEL-2000 Series is designed to meet the continuing shift toward high speed operation in today's semiconductor market. As the power supply units, DC-DC converters, and batteries that drive semiconductor circuits to follow this shift, power supply design, quality inspection, and characteristic certification using high-speed performance loads have become necessary. The PEL-2000 Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004 is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002 is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004 is configured with 4 load modules rated at 350W each, the PEL-2000 series is able to sink up to 1.4kVA of power.

For higher load capacities, mainframes can be linked together in parallel with standard MIL 20-pin connectors. A maximum of 5 mainframes, including one master and 4 slaves can be chained together to create a total load capacity of 7kW for high current and high power applications. Using 4 dual channel load modules, the PEL-2004 is able to test 8 power supply outputs simultaneously. The Sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step. Each sequence is able to run concurrently under the control of one clock. This is one of the most powerful features of the PEL-2000 Series as it is able to realistically simulate a multi-output power supply load. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a pre-defined speed up to 25 s per step. This is often used as the standard test procedure to verify the response of a power supply to quick load changes. Most remarkably, multiple load channels can be connected in parallel to run Dynamic tests synchronously under a single clock. This Parallel Dynamic functionality gives the flexibility to perform dynamic tests for a high-power power supply without the need of another high-power load.

•Scope of Delivery:
   GW Instek GW-PEL-2000A Module Unit
   GTL-120: Test Lead 1x
   GTL-121: Sense Lead 1x

• Optional Accessories (not included):
   PEL-001: GPIB Card
   PEL-002: PEL-2000A Series Rack Mount Kit
   PEL-003: Panel Cover
   GTL-251: GPIB-USB-HS(High Speed)
   GTL-248: GPIB Cable (2m)
   GTL-249: Frame Link Cable
   GTL-246: USB Cable, USB 2.0 A-B TYPE CABLE, 4P
   GTL-232: RS-232C Cable, 9-pin, F-F Type, null modem, 2m

Weiterführende Links zu "GW Instek: GW-PEL-2040A: Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~80V, 0~7"
GW Instek: GW-PEL-2020A: Elektronische Last - Programmierbar - Einschubmodul - 2 Kanäle - (1~80V, 0~ GW Instek: GW-PEL-2020A: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-2020A

Inhalt 1 Stück
1.543,00 € *
MN-M9711 Electronic Load MN-M9711 Electronic Load
Maynuo
MN-M9711

Inhalt 1 Stück
506,00 € *
USB Logikanalysator für PC - 500 MHz - 34 Kanäle USB Logikanalysator für PC - 500 MHz - 34 Kanäle
Intronix
IX-LA1034

Inhalt 1 Stück
425,00 € *
3U CompactPCI Serial Blades 3U CompactPCI Serial Blades
ADlink Technology
AD-cPCI-A3515D-4700E-M8

Preis auf Anfrage
Acute AE-ADP1025 Differential Probe: USB - Voltage 700V (DC+pk AC) - Attenuation 10X/100X - CAT II 6 Acute AE-ADP1025 Differential Probe: USB -...
Acute Technology Inc.
AE-ADP1025

Inhalt 1 Stück
300,00 € *
Leckstrom Tester Leckstrom Tester
GW Instek (Good Will Instruments)
GW-GLC-9000

Inhalt 1 Stück
2.088,00 € *
GW Instek: GW-PEL-2041A: Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~500V, 0~ GW Instek: GW-PEL-2041A: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-2041A

Inhalt 1 Stück
2.040,00 € *
GW Instek: GW-PEL-3021: Elektronische Last - Programmierbar - DC - 175W - 1.5...150V - 0...35A GW Instek: GW-PEL-3021: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-3021

Inhalt 1 Stück
1.609,00 € *
GW Instek: GW-PEL-3031E: Elektronische Last - Programmierbar - DC - 300W - 1V...150V - 60mA...60A GW Instek: GW-PEL-3031E: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-3031E

Inhalt 1 Stück
1.250,00 € *
GW Instek: GW-PEL-2002A: Elektronische Last - Programmierbar - Grundgerät mit Controller - 2 Module GW Instek: GW-PEL-2002A: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-2002A

Inhalt 1 Stück
914,00 € *
GwInstek GW-GPT-9601: Hipot Safety Tester: AC Withstanding - AC 100VA GwInstek GW-GPT-9601: Hipot Safety Tester: AC...
GW Instek (Good Will Instruments)
GW-GPT-9601

Inhalt 1 Stück
779,00 € *
Huntron Tracker HU-3200S  Tracker zum Test von bestückten Boards im ausgeschalteten Zustand Eing Huntron Tracker HU-3200S Tracker zum Test von...
Huntron
HU-99-0432

Preis auf Anfrage
Huntron Tracker HU-2800S

 Tracker zum Test von bestückten Boards im ausgeschalteten Zustand

 Einge Huntron Tracker HU-2800S Tracker zum Test von...
Huntron
HU-99-0402

Inhalt 1 Stück
4.964,00 € *
Huntron Tracker HU-2800

 Tracker zum Test von bestückten Boards im ausgeschalteten Zustand Huntron Tracker HU-2800 Tracker zum Test von...
Huntron
HU-99-0401

Inhalt 1 Stück
3.839,00 € *
Zuletzt angesehen