Model Marvin Test Solutions: MV-GX6032
GENASYS Matrix Switch Rear Interface Module, 32 x 16
- 32 x 16 matrix GENASYS switch card
- Provides access to internal 16 wire switching bus
- Rear I/O module provides access to the J5 bus
A component of the GENASYS switching subsystem, the Marvin Test MV-GX6032 switch card is one of several different switch cards which can be installed in the MV-GX7016 chassis and provides instrument access to the MV-GX7016's internal, 16-wire bus. The MV-GX7016 switching subsystem offers a new level of high performance, high density switching for board and system level functional test. Based on the 6U PXI architecture, the MV-GX7016 incorporates a modular switch matrix and multiplexer architecture which supports up to 4608 multiplexed, hybrid I/O pins. Up to 128 external resources can be connected to any of the test systemâ€™s receiver I/O pins via a high performance, internal 16 wire matrix bus. The MV-GX7016 chassis incorporates the MAC Panel 6U SCOUT receiver with each switch card providing a "cable-lessâ€ connection to the receiver connectors, - eliminating the need for cable harnesses and the associated reliability issues that come with cabled solutions. The result is a system interconnect design that is cost effective, reliable, and maintainable.
The modular architecture of the MV-GX7016 allows the switching subsystem to support a wide range of configurations and capabilities. Input analog signal routing is supported by the MV-GX6032, a matrix switch module which is located on the rear of the chassis. This module is configured as 32 x 16 matrix and supports up to 32 inputs which can be connected to the MV-GX7016â€™s internal 16 wire bus. Up to (4) of these modules can be supported by the system.
Scope of Delivery:
- Marvin Test Solutions MV-GX6032: GENASYS Matrix Switch Rear Interface Module, 32 x 16